So, you’ve brought your generator out of 해외스포츠중계 storage, filled the tank, http://query.nytimes.com/search/sitesearch/?action=click&contentCollection®ion=TopBar&WT.nav=searchWidget&module=SearchSubmit&pgtype=Homepage#/스포츠중계 pulled the wire, and almost nothing. Ideally, that you are finding this out BEFORE the ability outage or camping journey. This information will make it easier to take care of some widespread problems you could possibly experience. In advance of making an attempt any repair service, clear away the spark plug to forestall accidental starting up while you are engaged on the device.
In case the generator will never start off or won’t stay started, Look at the muffler exhaust for an international particles. At the time which is clean, Examine the gasoline and oil to you should definitely have proper levels of the two. Ultimately, be certain the spark plug has a good relationship.
If the alternator fails to excite, it might be functioning at far too lower of the pace. Modify the rpm. This also can consequence from the faulty capacitor or windings, which need to be replaced and tightened.
When the voltage is operating high without load over the generator, you might need to regulate the rpms to some lower speed or substitute the capacitor. Conversely, When the voltage is functioning minimal beneath no load, you may need to regulate the rpms to the next pace or swap the capacitor with a single with a higher rating. Furthermore, for lower voltage, you need to check your winding resistance and substitute your rotary diodes, if necessary.
If the voltage is Okay with no load, but drops after you incorporate a small load, you may need to improve your rpms or take away some of the load. You could potentially also have to have to interchange your rotary diodes.
When the voltage drops any time you include a large load, you almost certainly require to regulate the rpms or eliminate some of the load.
Eventually, In case the voltage fluctuates, it could be the results of loose or filthy connections. You may additionally need to manage the rpms to solve this problem.